Round black plastic electric massage oil warmer without water
With timer function & spare bottle
Kuro - black glossy surface and elegant design
62,95 Euro net plus VAT and shipping
Advantages for the user
- Perfectly tempered massage oil, the warmer can be used all day long
- No annoying drying of the bottle as no water is used for heating
- Optically beautiful warmer, no baby bottle warmer
- No open flames
- Easy to clean
- Pump or spray bottles available
Advantages for the guest
- Pleasantly tempered massage oil
- No too hot or cold massage oil
- No distraction of the therapist
The PRO MASSAGE electric massage oil warmer ensures that your massage oil is always at the right temperature and your guest can enjoy a pleasant massage. In about 20 minutes, the oil or lotion is gently heated to an average of 40 degrees, and within 60 minutes to the maximum temperature of 65 degrees.
The temperature is kept constant as long as the device is switched on. When applied, the oil is slightly warmer than body temperature and feels comfortable on the skin, but not too hot. The PRO MASSAGE massage oil warmer maintains temperature throughout the day and is versatile for use in spa, institute, nail salon, practice or at home. Its compact and lightweight design also makes it very practical for mobile massages. The elegant and shapely warmer made of plastic is available in dark walnut look or natural wood look. With just one click, you can safely and effectively heat your massage oil. You can keep your oil or lotion consistently warm all day long. With no open flames or water, the inside of the massage oil warmer heats up and transfers heat to the oil in the bottle.
Use
The warmer has a power button, timer button and two buttons to set the temperature or timer time.
Temperature
We recommend a temperature of 50 degrees Celsius for your massage oil. It takes about 45 minutes to reach the temperature of about 50 degrees, about 60 minutes to reach 65 degrees. Even if the display says 65 degrees, the massage oil may not have reached this temperature completely after a short time, but only that massage oil near the bottom. Therefore, we recommend to turn on the warmer in time before the treatment.
Timer
You can set a timer between 1 and 24 hours. Only then will the warmer turn on.
Cool massage oil
When using the pump bottle, it is important that the bottle is completely filled so that the riser tube in the bottle is surrounded with massage oil. For example, if the bottle is half full, then the top of the oil in the riser tube will be colder and it may appear that the oil is not properly warm. Therefore, pump off the cool oil or use full bottles.
Disk top cap
Alternatively, you can use the bottle with the Disk Top cap. These are available in the store.
Pump bottle
The bottle is made of a soft plastic. During the pumping process a vacuum can occur if no air can get into the bottle. Therefore all bottles are provided with a small air circulation hole in the thread
of the bottle (approx. 1 mm). It is located in the threaded part. So air can enter the bottle during the pumping process and a vacuum can be avoided. The small hole is not visible, it is covered by the cap of the pump. When filling the oil, please make sure that you seal the small hole with your
finger so that no oil leaks out during filling.
Cleaning
Due to the easy to clean plastic surface, it is no problem to clean the massage oil warmer. Excess oil is simply wiped off with a damp cloth. Clean the device only when it is switched off and unplugged. Follow the instructions in the user manual.
Accessories
Fill your massage oils and lotions into our bottles, which fit exactly into the PRO MASSAGE massage oil warmer. This way you always have your oil at the right temperature. The bottles can be cleaned with hot water and antibacterial soap.
Technical data
Voltage: 220 V
Frequency: 50/60 Hz
Power: 50 W
Temperature: 30 - maximum 65 degrees Celsius
Weight: approx. 600 gram
Cable: 100 cm with Schuko plug
Size: approx. 16 cm high, 10 cm wide
WEEE-Reg. No. DE 55750600